LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Interior Equipment) >> Adjustment - Replacement >> Glove box lock >> To Remove

To Remove

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box lid. See Glove Box Lid .
    Fig 1: Removing Glove Box Lock
    G03509979Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Place the lid on a covered workbench.
  3. Drill holes with a 2 mm bit in a circle inside the marked circle on the back of the lid.
    NOTE: The drill must go only just through or else the lock mechanism may be damaged.
  4. Cut carefully away the remaining goods.
  5. Bend out the hooks securing the lock cylinder and press it out.
  6. Remove the lock holder with a screwdriver.
scientia non olet · About LEMON Manuals