LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Interior Equipment) >> Adjustment - Replacement >> Glove box lock >> To Fit

To Fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Fit in reverse order.

NOTE: Make sure the lock cylinder is in the correct position before pressing it on. Seal the drill hole with the plug included with the new lock cylinder fitting kit. Use adhesive if necessary.
scientia non olet · About LEMON Manuals