LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Seats) >> Adjustment-Replacement >> Seat cushion, rear seat, 3D/5D >> To fit

To fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Fit in reverse order

NOTE: Insert the hinge pins on the 60-percent part and the outer pin on the 40 - percent part from right to left. The inner pin on the 40-percent part is inserted from left to right.


Fit in reverse order.

NOTE: Fasten the upholstery to the padding with staples using the pliers included in the fitting kit.
scientia non olet · About LEMON Manuals