LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Glass, Windows And Mirrors) >> Fault Diagnosis, Symptom >> Noise from side window seals, CV >> Procedure

Noise from side window seals, CV: Procedure

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Operate the soft top with the ROOF button so that it is half open with the soft top cover pointing straight up. Place the soft top support 82 93 144 Holder, hydraulic soft top to prevent the soft top from falling down when the hydraulic pressure is released. The rear side windows must be closed and the door windows open.
  2. Apply the lubricant to the surfaces of the sealing strip.
    Fig 1: Applying Lubricant To Surfaces Of Sealing Strip
    G03509583Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals