LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Glass, Windows And Mirrors) >> Adjustment - Replacement >> Rear side window with lift mechanism, CV >> To remove

To remove

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear side trim. See TO REMOVE  .
  2. Mark the positions of the bolts and then remove the inner window well seal retainer.
    Fig 1: Illustration For Step 3-4
    G03509477Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the outer window well seal retainer.
  4. Remove the loudspeaker.
  5. Raise the window.
  6. Loosen the nuts securing the lift mechanism to the body.
    Fig 2: Illustration For Step 7-9
    G03509478Courtesy of SAAB-SCANIA OF AMERICA, INC.
  7. Lift up the lift mechanism out of the mounting grooves in the body, lower it and unplug the lift motor connector.
  8. Lift up the window and the lift mechanism.
  9. When replacing a separate mechanism or window, remove the bolts that secure the window to the lift mechanism. When changing the window only, mark the position of bolt "A".
scientia non olet · About LEMON Manuals