LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Doors & Locks) >> Adjustment - Replacement >> Boot lid gas springs, CV >> To fit

To fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the gas spring on the ball joint by the side panel.
    Fig 1: Illustration For Step 1-3
    G03509271Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Press on the clip.
  3. Fit the gas spring on the ball joint by the boot lid.
scientia non olet · About LEMON Manuals