LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Convertible) >> Technical Description >> Door and boot lid seals

Door and boot lid seals

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Door opening seal

    Seals between the door and the A-pillar, sill and B-pillar. It is pressed onto a metal flange and secured to the sill with seven clips plus one clip on the rear end of the seal.

  2. Sill seal

    Seal between the bottom of the door and the sill. It is pressed onto weld screws in the sill.

  3. Door opening, rear edge

    Seals between the rear edge of the door and the B-pillar. It is secured with eight clips.

  4. Luggage compartment opening

    Seals between the boot lid and the luggage compartment. It is pressed onto the metal flange around the luggage compartment.

  5. Fig 1: Illustration For Steps 1-4
    G03509143Courtesy of SAAB-SCANIA OF AMERICA, INC.