LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Convertible) >> Fault Diagnosis, Symptom >> Noise from the swivelling covers on the soft top cover >> Procedure 2

Procedure 2

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Fit spacer, part no. 69 92 028.

  1. Maneuver the soft top so that the soft top cover is open.
  2. Remove the spacer adhesive. Grind the opposite side.
  3. Grind the adhesion surface of the swivelling covers on the soft top cover.
  4. Apply Loctite 406 on the ground side of the spacer. Fit the spacer as shown in the illustration.
    Fig 1: Fitting Spacer
    G03509060Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Check that the noise no longer occurs.
scientia non olet · About LEMON Manuals