LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Convertible) >> Fault Diagnosis, Symptom >> Noise from side trim >> Procedure

Noise from side trim: Procedure

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Rear side trim, CV 
  2. Grind the metal bracket approx. 2 mm as shown in the illustration.
    Fig 1: Identifying Metal Bracket Grinding Dimension
    G03509077Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Fit the rear side trim, CV 
scientia non olet · About LEMON Manuals