LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Convertible) >> Fault Diagnosis, Symptom >> Noise from A-pillar >> Procedure 6

Procedure 6

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Symptom:  Creaking noise

Cause:  Clip marking at A-pillar flange with uneven edges

Cars concerned:  - 27013325

  1. Remove Dashboard 
  2. Grind the surfaces requiring welding as shown in the illustration.
    Fig 1: Identifying Welding Surface Grinding Point
    G03509083Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Seam weld as shown in the illustration.
  4. Grind the weld.
  5. Apply primer to all ground surfaces.
  6. Apply anti-corrosion agent after painting. Use Terotex HV 400.
  7. Fit the dashboard  .
scientia non olet · About LEMON Manuals