Soft top storage: Removing
WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Open the boot lid.
- Remove the clips and loosen the bolts, close the boot lid.
- Remove the soft top. See SOFT TOP .
- Remove the upper mountings for the seat belts.
- Remove the front moulding and the two clips from the body.
- Lift up the rear part of the outer window seal and remove the clip under the moulding.
- Tap in the pins on the clips on the side protectors and pull out the clips.
- Remove the soft top cover seal strip.
- Remove the plastic clips.
- Push out the cable lead-through and lift up the Velcro strip.
- Unplug the connectors.
- Lift out the soft top storage.