Microswitch soft top cover latch: Removing

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

The following describes how the right microswitch is removed. Left microswitch is removed using the same method.

Remove the rear side trim. See REMOVING .
Remove the clip for the rear trim and lift up the trim.
Remove the screws holding the microswitch.
Unplug the connector and remove the microswitch.

Fig 1: Illustration For Steps 1-4

Courtesy of SAAB-SCANIA OF AMERICA, INC.