Adjusting the door and side windows, CV: Adjustment

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Before beginning adjustment, ensure that the following points are correctly performed:

Door setting, see ADJUSTMENT - REPLACEMENT .
Hood setting, see ADJUSTING THE SOFT TOP .
Adjusting the hood seals, see ADJUSTING SEALS .

IMPORTANT: All adjustments are made with the soft top closed unless specified otherwise.

NOTE: When working with door and/or side windows with this instruction, always perform the entire process. Adjustment of the door and/or side windows applies to both the door window and side window - check/perform whenever any integral component has been replaced or modified. Adjustment should also be made at the same time for both the door window and side window. This means for example that if the door window setting is changed in some way, the side window setting should also be checked/adjusted.

NOTE: The adjustment points with numbering, and their effect on the door or side windows, are described under the following headings "Adjustment points for door window" and "Adjustment points for side window".