LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Bus And Diagnostics Communication) >> Fault diagnosis, symptoms >> No contact with any bus system >> Diagnostic help

Diagnostic help

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

First check the fuses for the DICE control module and that no slide-out of the data link connector pins for communication with the DICE has occurred.

Then check whether the DICE is awake and allows diagnostics communication. If this is the case, check whether the diagnostics tool works on another car.

If no fault can be found, rectify the communication lead between the DICE and the data link connector.

scientia non olet · About LEMON Manuals