Windscreen washer hoses: Removal
WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Detach the washer hose from the cover on top of the false bulkhead panel.
- Detach the hose from the nozzles in the bonnet and remove the hose and rubber bushing from the bonnet.
- Remove the rubber seal from the protective cover.
- Remove the clips from the cover on top of the false bulkhead panel.
- Lift the cover a little and detach the washer hose from the underside of the cover.
- Pull the hose out through the partition and disconnect it at the fork behind the battery.