Windscreen washer hoses: Refitting
WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Refit the hose on to the fork behind the battery and pull it into the cover on top of the false bulkhead panel.
- Replace the protective cover and refit the washer hose on to the underside.
- Refit the clips on to the cover on top of the false bulkhead panel.
- Refit the rubber seal on to the protective cover.
- Reconnect the hose to the washer nozzles.
- Pull the hose through the rubber bushing from the bonnet to the union in the protective cover.