Washer hose, rear window: Refitting
WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
- Thread the hose through the rubber bushing in the boot lid and refit the bushing.
- Refit the hose on to the clips in the C-pillar.
- Refit and press the nozzle into place on the washer hose.
- Fit the high-level brake light
- Reconnect the soft hose on to the hard hose.
- Refit the trim on to the left-hand side of the boot and the C-pillar.
- Refit the screws that hold the loudspeaker grille in place.