LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Technical description >> Main beam >> Diagnosis

Main beam: Diagnosis

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

DTC B2280 is generated when there is an open/short circuit to earth in the main beam circuits.

DTCs are not generated if the voltage is below 11V or during diagnostic communication.

IMPORTANT: When changing a bulb, use one with the right output otherwise the components could be damaged.


DTC B2280 is generated when there is an open/short circuit to ground or short circuit to B+.

DTCs are not generated if the voltage is below 11V or during diagnostic communication.