LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Fault diagnosis, fault codes >> DTC B2280: Dipswitch relay >> Condition

DTC B2280: Dipswitch relay: Condition

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

The control module output is monitored and a DTC generated if there is a:

DTCs are not generated if the voltage is below 11V or during diagnostic communication.