LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Fault diagnosis, fault codes >> DTC B1160: Dipped beam relay >> Condition >> Notes

DTC B1160: Dipped beam relay: Condition: Notes

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

The control module output is monitored and a DTC generated if there is a:

DTCs are not generated if the voltage is below 11V or during diagnostic communication.