LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Fault diagnosis, fault codes >> DTC B1160: Dipped beam relay >> Condition >> Diagnostic Help

Diagnostic Help

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

The output from DICE can be activated with the diagnostic tool.

DTCs are not generated if the voltage is below 11 V or during diagnostic communication with DICE.