LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Light switch >> To Fit

To Fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Illustration For Step 2-3
G03501548Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Connect the new light switch
  2. Press the light switch into the panel.

Light bulb in light switch 

Fig 2: Illustration For Step 1-3
G03501549Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the light switch as described above.
  2. Pull out the lamp holder.
  3. Replace the lamp bulb and press the switch back into the panel.
scientia non olet · About LEMON Manuals