LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Light adjustment, headlamps >> Vertical Adjustment >> Electrical

Vertical Adjustment: Electrical

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The height-adjuster must be in the 0 position while adjustment is being made. The ignition must have been turned on once.

Vertical adjustment is performed with the adjusting knob on the actuator motor, which adopts the new setting as the starting point for the headlamp beam adjustment.