LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Headlamp beam adjustment motor >> To Fit

To Fit

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Illustration For Step 1-3
G03501554Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the cover.
  2. Lift up the reflector and press down the motor shaft into the groove.
  3. Press in the motor and turn it approx. 45° to fasten it.
  4. Fit the headlamp, see Main Lighting .
  5. Fit the direction indicator, see Direction Indicators, Front .
scientia non olet · About LEMON Manuals