LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Evaporative Emission Systems ORVR) >> Adjustment - Replacement >> Fitting a service port >> Dismantling

Fitting a service port: Dismantling

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drive the car on to a lift and raise it.
    Fig 1: Illustration For Steps 3-4
    G03503561
  2. Open the bonnet.
  3. Detach the purge line from the rubber hose on the EVAP purge valve.
  4. Detach the purge line from the securing clip.
scientia non olet · About LEMON Manuals