LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brakes - Repair) >> Removal & Installation >> Vacuum Pipe (With Vacuum Boost) >> Removal

Vacuum Pipe (With Vacuum Boost): Removal

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper engine cover. See step  1 in VACUUM PUMP (MECHANICAL).
  2. Remove the pipe from the charge air pipe. See Fig 1 . Press in the Red ring and pull out the pipe. Remove the pipe from the intake manifold. Press in the Red ring and pull out the pipe.
  3. Remove the hose from the brake booster.
Fig 1: Identifying Vacuum Pipe
G00305354Courtesy of SAAB-SCANIA OF AMERICA, INC.