LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brakes - Repair) >> Removal & Installation >> Rear Brake Pads >> Removal

Rear Brake Pads: Removal

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the car and remove the wheels.
  2. Press the brake piston back using a pair of slip-joint pliers.
  3. Remove the pins and keep the retaining spring.
  4. Remove the brake pads. If they seize, use Remover to remove brake pads.
  5. Clean the surfaces where the brake pads are in contact with the brake caliper. Use a soft metal brush. Also check the dust caps.