LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brakes - Repair) >> Removal & Installation >> Front Brake Caliper >> Installation

Front Brake Caliper: Installation

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake caliper, secure the bolts with Loctite 242 (74-96-268). Tighten the 2 front caliper retaining bolts to specification. See TORQUE SPECIFICATIONS  .
  2. Install the brake hose to the brake caliper. Tighten to specification. See TORQUE SPECIFICATIONS  .
    NOTE: Pay attention to how the hose is turned so that it is not installed incorrectly.
  3. Bleed the brake system. See BRAKE SYSTEM  under BLEEDING.
  4. Install the wheel. Tightening to specification. See TORQUE SPECIFICATIONS  .
  5. Lower the car and depress the brake pedal to press out the brake pistons. Top off with DOT 4 brake fluid as necessary. Install No. 12 fuse.
scientia non olet · About LEMON Manuals