LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brakes - Repair) >> Removal & Installation >> Brake Pipes >> Removal

Brake Pipes: Removal

WARNING: This page is about a different car, the 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the connections of the damaged brake line.
  2. Unscrew the brake pipe connecting fittings and any other fastening clips.
    NOTE: Use a brake wrench for installing and removing fittings.
  3. Insert plastic plugs into the open connections and remove the damaged brake line.
scientia non olet · About LEMON Manuals