Daytime Running Lights (DRL)
On certain markets, dipped beam is used as daytime running lights, which light automatically when the ignition is switched on.
DRL can be adjusted (ON/OFF) using the diagnostic tool. If the value is set to ON, dipped beam will come on when the light switch (10) is in position 0. If the value is set to OFF, neither parking lights nor dipped beam will come on when the light switch (10) is in position 0.
LIGHT SWITCH POSITIONS
| DRL | Light switch positions | ||
|---|---|---|---|
| 0 | 1 | 2 | |
| DRL OFF | No main lighting | Parking lights | Main and dipped beams |
| DRL ON | Parking lights and dipped beam | Parking lights and dipped beam | Main and dipped beams |
If main beam is on and the ignition is turned off, or if the light switch is turned to any other position, the main beam will be switched off and must be turned on again.
When the ignition is off, the same programming function applies to all markets. In position 0, no lights are lit. In position 1, parking lights are lit.