Light cluster unit, boot lid (418HL/HR): Connection

Fig 1: Identifying Main Task Connection

Courtesy of SAAB-SCANIA OF AMERICA, INC.

DESCRIPTION CHART

Pin No.	Signal type	Description
1	Power supply, B+	Headlamp power supply for reversing lights, from REC pin 1 (T-C) to 418HL and from pin 11 (T-B) to 418HR
2	Ground	Headlamp's ground in the body via REC
3	Power supply, B+	Headlamp power supply for fog light, from REC pin 2 (T-C)

Rear fog light bulb (33HL/HR)

Fig 2: Rear Fog Light Bulb (33HL/HR) Circuit Diagram

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Left reversing light bulb (32HL)

Fig 3: Left Reversing Light Bulb (32HL) Circuit Diagram

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Right reversing light bulb (32HR)

Fig 4: Right Reversing Light Bulb (32HR) Circuit Diagram

Courtesy of SAAB-SCANIA OF AMERICA, INC.