LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting (Late; 9440) >> Adjustment - Replacement >> Xenon lamp >> To fit

To fit

  1. Fit the Xenon bulb in place by carefully inserting it into the headlamp housing.
    Fig 1: Illustration For Step 1-2
    G03615557Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Secure the clamp holding the Xenon bulb.
  3. Fit the ignition transformer.
    Fig 2: Illustration For Step 3-5
    G03615558Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Plug in the ignition transformer connector.
  5. Fit the protective cover of the Xenon lamp.
  6. LH:  Fit the battery cover and washer filler pipe.
  7. Clear any diagnostic trouble codes.
scientia non olet · About LEMON Manuals