Reversing lights: Replacing

Remove the boot lid trim.

Fig 1: Illustration For Step 1
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Detach the bulb socket from the lamp housing by pressing down the lock tongue.
IMPORTANT: When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.

Fig 2: Illustration For Step 2-3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Replace the bulb.
Fit the bulb socket.

Fig 3: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the boot lid trim.

Fig 4: Illustration For Step 5
Courtesy of SAAB-SCANIA OF AMERICA, INC.