LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment (Late; 9440) >> Adjustment/Replacement >> Sound insulation panel, passenger >> To fit

To fit

NOTE: Ensure that the locating flange on the panel is correctly positioned in the locating lugs on the heating and ventilation unit.
  1. Locate the lower section of the panel.
  2. Reconnect the floor illumination connector.
    Fig 1: Illustration For Steps 1-3
    G03625583Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Refit the screws attaching the sound insulation panel to the fan housing and the heating and ventilation unit.
    NOTE: Ensure that the side console mountings are located correctly in the floor console.
  4. Fit the forward side panel of the floor console.
    Fig 2: Illustration For Step 4
    G03625584Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals