To fit

WARNING: Take care not to damage or loosen the energy absorbers.
Damaged or loose energy absorbers must not be refitted. If the occasion should arise, the entire headlining must be changed. Damaged energy absorbers may impair head protection in case of a collision.

Attach the headlining by carefully pushing the outer edges upwards so that the clips engage. Adjust the weather strips so that they are correctly positioned.

Fig 1: Illustration For Step 1
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the COURTESY HANDLE .
Vehicles with sunroof:
Position the sunroof trim moulding and press it carefully so that it engages in the clips around the sunroof opening. Ensure that the headlining textile is stretched and correctly arranged.

Fig 2: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the upper brake light cover and press home the headliner clips.

Fig 3: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the rain sensor cover.

Fig 4: Illustration For Steps 5-6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Plug in the rear-view mirror connector and fit the mirror.
Fit the forward section of the roof light cover.

Fig 5: Illustration For Steps 7-8
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the rear section of the roof light cover.
Thread the headlining wiring harness through the parcel shelf and connect it to the REC.

Fig 6: Illustration For Steps 9, 11
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Where appropriate.
Fit the left-hand speaker into the parcel shelf.
Position the wiring harness to the REC and secure the clips.
Fit the C-PILLAR TRIM .
Fit the B-PILLAR TRIM .
Fit the A-pillar trim.
Fit the PARCEL SHELF TRIM .
Fit the SUN VISOR .