LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment (Late; 9440) >> Adjustment/Replacement >> Centre air vent, panel >> To remove

To remove

  1. Remove the centre panel vent by carefully bending in the 2 upper lugs on the upper section, which are accessible through the grille whilst pulling straight out on the guide pin and freeing the lower lugs.
    Fig 1: Illustration For Step 1
    G03625667Courtesy of SAAB-SCANIA OF AMERICA, INC.
    NOTE: It is important to bend the correct lugs. The lugs which retain the air vent can be seen through the grille.
  2. Lift out the centre air vent.
scientia non olet · About LEMON Manuals