LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment (Late; 9440) >> Adjustment - Replacement >> Window frame cover, front, 4D >> To remove

To remove

  1. Open the front window fully.
  2. Remove DOOR TRIM, FRONT .
  3. Remove the cover in the window frame cover.
    Fig 1: Illustration For Steps 3-4
    G03625719Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Unplug the switch by pressing with a small screwdriver to release the clip on the connector.
  5. Detach the clips which fasten the frame cover at the front.
    Fig 2: Illustration For Steps 5-6
    G03625720Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Remove the frame cover by first pulling it outwards at the front edge.
  7. Then pull the front section of the frame cover slightly backwards so that the cover is released from the upper door frame.
  8. When the upper section of the cover is free from the door frame, pull the cover carefully forwards so that it releases from the corner of the door frame.
    Fig 3: Illustration For Steps 8-9
    G03625721Courtesy of SAAB-SCANIA OF AMERICA, INC.
  9. Carefully maneuver the cover upwards so that it is released from the back edge of the door frame.
scientia non olet · About LEMON Manuals