To remove

Remove the centre panel vent and the driver's panel vent by carefully bending in the 3 upper lugs that are accessible through the grille while pulling straight out on the guide pin.

Fig 1: Illustration For Step 1
Courtesy of SAAB-SCANIA OF AMERICA, INC.

NOTE: It is important to bend the correct lugs. The lugs which retain the air vent can be seen through the grille.
Remove the infotainment system control panel (ICM).

Fig 2: Illustration For Step 2
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the SID control panel (SIDC) by pushing together the two tabs on the back and then pushing the panel outwards, starting at the upper edge.

Fig 3: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the instrument panel (8 screws).

Fig 4: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.