LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 SE, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Interior Equipment (Late; 9440) >> Adjustment - Replacement >> Insulation, bonnet >> To fit

To fit

  1. Fit the insulation onto the hooks on the back edge of the bonnet.
    Fig 1: Illustration For Steps 2-3
    G03625746Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Centre the insulation so that the clip holes align.
  3. Clips with screw:  Fit the clips and press in the centre screws.

    Clips with hole:  Fit the clips.

  4. Close the bonnet.
scientia non olet · About LEMON Manuals