LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Linear, Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System, Petrol (Late; 9440) >> Adjustment - Replacement >> Oil delivery pipe, turbocharger >> To fit

To fit

IMPORTANT: To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressures, the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 93 160 907 Motip Dupli cleaning agent to wipe clean inside the ends of the hoses. Clean also the connecting pieces. If hose clips are rusty or damaged, they must be replaced with new ones to maintain the correct clamping force.
  1. Fit the upper section of the oil delivery pipe to the turbocharger with new gaskets and connect the pipe.

    Tightening torque, oil delivery pipe to turbocharger 28 Nm (20 lbf ft) 

    Fig 1: Illustration For Steps 1-2
    G03604546Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the lower section of the oil delivery pipe to the engine block. Replace the gaskets.

    Tightening torque 28 Nm (20 lbf ft) 

  3. Fit the turbocharger delivery pipe.
    Fig 2: Illustration For Step 3
    G03604547Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Fit the turbocharger heat shield.
scientia non olet · About LEMON Manuals