LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2003 >> 9-3 Linear, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Telematics And Navigation (Late; 9440) >> Adjustment / Replacement >> Telematics unit (468), 4D >> To remove

To remove

  1. Carry out procedures before removing a control module.
  2. Remove the parcel shelf trim.
    Fig 1: Removing Parcel Shelf Trim
    G03618981Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Remove the screws.
    Fig 2: Illustration For Steps 3 And 4
    G03618982Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  4. Unplug the connectors.
  5. Lift out the telematics unit.