Standard chassis
NOTE:
After wheel geometry adjustment, complete Steering Angle Sensor calibration.
Alignment, see FOUR WHEEL ALIGNMENT .
STANDARD CHASSIS WHEEL ALIGNMENT SPECIFICATIONS
| Rear wheels | Dimension | |||
|---|---|---|---|---|
| Angle | 16" | 17" | 18" | |
| Toe, total | 0.24° +/-0.08° | 1.71 mm +/-0.57 mm | 1.89 mm +/-0.63 mm | 2.06 mm +/-0.69 mm |
| Toe, per side | 0.12° +/-0.04° | 0.86 mm +/-0.29 mm | 0.94 mm +/-0.31 mm | 1.03 mm +/-0.34 mm |
| Camber | -0.70° +/-0.30° | |||
| Front wheels | Dimension | |||
| Angle | 16" | 17" | 18" | |
| Toe, total | 0.28° +/-0.08° | 2.00 mm +/-0.57 mm | 2.20 mm +/-0.63 mm | 2.40 mm +/-0.69 mm |
| Toe, per side | 0.14° +/-0.04° | 1.00 mm +/-0.29 mm | 1.10 mm +/-0.31 mm | 1.20 mm +/-0.34 mm |
| Camber | -0.80° +/-0.50° | |||
| Difference between left and right-hand side | Max. +/-0.50° | |||
| Caster | 2.90° +/-0.50° | |||