Xenon headlamps

Main and dipped beam, tail lights, number plate lighting and parking lights are part of the main lighting. For the headlamps to be active, the light switch must be in position 2 and the ignition must be switched ON. Main/dipped beam and parking lights are controlled by the fuse box in the engine bay. With dipped beam, the Xenon lamps and parking lights shine. With main beam, the H7 halogen lamp also shines (not US/CA). Once switched on, the Xenon lamp always shines at the same power. For main beam, the screen is completely down. For dipped beam, the Xenon lamp is partially screened. The halogen lamp and Xenon lamp shine together for main beam (not US/CA).

On certain markets, the dipped beam is used as daytime running lights. The light switch must then be in position 0.