To fit

IMPORTANT: When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.

Fit the bulb into the socket.
NOTE: To facilitate bulb fitting, look at the bulb from the front through the headlamp lens while fitting.

Fig 1: Illustration For Steps 1 & 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Fit the bulb socket in the lamp housing.
Fit the protective cover of the headlamp.
LH: Fit the battery cover.

Fig 2: Illustration For Step 4-5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
LH: Refit the radiator hose.