The MIU sends the following information:
INFORMATION SEND BY MIU
| Information | Values | Used by | The value depends on the following sensor input, signal or function |
|---|---|---|---|
| Vehicle speed | km/h mph |
DICE, SID, ACC, Audio, TWICE, STC, T7 | Wheel speed RL (wire from ABS, bus from TC/ABS). MIU controls the speedometer. |
| Acoustic warning | Acoustic information | SID | Request for acoustic signal when central warning lamp or Info Displ goes on. |
| Fuel Consumed Since Start | 0-65535 ml | SID | Bus from Trionic T7. The reading is corrected by an adjustment factor in the MIU. The factor can be adjusted with the diagnostics instrument. |
| Fuel level | Litres | SID | Tank sensor, control module adjustment The MIU sends information on the current amount of fuel in the tank. |
| Odometer reading | km miles |
SID | Display value. Information on distance driven. |
| Identification number | --- | TWICE | The number is generated in the MIU when the immobilization code is programmed in TWICE. |
| Diagnostics communication | --- | DICE/ Diagnostic tool | Control module should be live and the bus leads intact. |