The STC uses the following information
STC INFORMATION RECEIVING DESCRIPTIONS (BUS)
| STC receives | Values | Sensor system | |
|---|---|---|---|
| Boot lid | OPEN / CLOSED | TWICE | Status of boot lid switch. The STC control module does not allow operation of the soft top when the boot lid is "open". SID will display "CLOSE TRUNK LID" if an attempt is made to operate the soft top. |
| Vehicle speed | km/h, mph | MIU | Wheel speed, rear left (lead from ABS). The STC control module will allow the soft top to be operated only when the vehicle speed is below 10 km/h. |