TWICE uses the following information for the theft protection

THEFT PROTECTION TWICE INFORMATION

Information	Values	From	The value depends on the following sensor input, signal or function
SID buttons	Clear, Set, Trip Down, Trip Up, Night Panel	SID	Buttons. TWICE uses the information to disconnect the glass breakage sensor and angle sensor. For this, the "Night Panel"-button is used with the key removed from the ignition.
Soft top position	Up/In motion/Down	STC	Switches on top of windscreen frame, Soft top cover switch. TWICE uses the information to disconnect the glass breakage sensor when the hood is open and stowed and to allow the luggage compartment to be opened or not.
Identification number		MIU	Value created in MIU when immobilizer code is programmed in TWICE TWICE uses the information for the immobilization function.
Diagnostics communication		DICE/diagnostic tool	Control module should be powered and the bus leads intact See BUS AND DIAGNOSTICS COMMUNICATION