Anti-theft alarm

The anti-theft alarm can be factory-fitted or installed as an accessory.

The anti-theft alarm is armed/disarmed using the car key. On the US/CA/LA markets, the alarm can also be armed/disarmed using the key in the driver's door or the boot lid/tailgate (disarming). If the anti-theft alarm is armed and the car key is inserted into the ignition and turned, the anti-theft alarm will be disarmed when the correct identification code is received from the transponder.

The anti-theft alarm has the following inputs for tripping the alarm:

• Door switches
• Luggage compartment switch
• Bonnet switch
• Ignition lock (position ON with incorrect key)
• Glass breakage sensor
• Angle sensor (accessory)

A tripped alarm is indicated by:

• Direction indicators
• Siren

The behaviour of the anti-theft alarm depends on the market.