LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2001 >> 9-3 Base, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting And Signaling Systems >> Technical description >> Glove box light >> Diagnosis

Glove box light: Diagnosis

The output has an overload protection that shuts the output off if the load is too high. This activates DTC B1220.

DTCs are not generated if the voltage is below 11V or during diagnostic communication.

NOTE: When there is a fault in the interior lighting circuit, DTC B1220 can be generated (normally B1215) because the roof lamp (50F) is not electrically insulated from the reading and mirror lighting.
scientia non olet · About LEMON Manuals