LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2001 >> 9-3 Base, 4D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Lighting And Signaling Systems >> Fault diagnosis, fault codes >> DTC B1735: Lighting for buttons and controls >> Condition

DTC B1735: Lighting for buttons and controls: Condition

The output is overload protected and is cut if the load is too high. A DTC is generated if this occurs.

DTCs are not generated if the voltage is below 11V or during diagnostic communication.

scientia non olet · About LEMON Manuals